Product Description
BELKIN 6 Y-SPLITTER FOR HEADPHONE/IPOD -- 2 X 3.5MM FEMALE / 3.5MM MALE (White) (#F8V234-WHT-APL) (Retail)
Product Description
XMicro2 delivers unsurpassed performance, and is compatible with all automotive XM Satellite Radio receivers. Measuring less than a half-inch tall, the TERK XMicro2's sleek, aerodynamic design hugs the roof or trunk of any vehicle and is virtually invisible when installed. The XMicro2 offers significantly enhanced functionality and installation versatility, thanks to its built-in FM modulator. This enables the XMicro2 to receive satellite radio signals and send them to the vehicle's existing FM antenna, which then sends the signal to the car's head unit. This feature is designed specifically for the XM Roady2 and XM SKYFi2 XM Satellite Radio modules. This innovative design eliminates the necessity of using a cassette tape adapter to feed the signals from the XM Ready 2, or XM SKYFi2 receivers, greatly simplifying installation and eliminating the wires formerly required. To ensure best-quality reception at all times, the XMicro2 utilizes a dual-mode, ultra-high-gain design. This design captures signals from both XM Radio satellites and terrestrial repeaters, to virtually assure continuous coverage. Though ultra-compact - it's the smallest XM Satellite Radio antenna on the market - the XMicro2's high-tech, miniaturized antenna elements and built-in FM transmitter provide optimum reception of over 130 XM Radio channels of music, talk, weather and sports. The XMicro2 is compatible with all XM Satellite Radio systems. Complementing its top-quality performance, the TERK XMicro2 is extremely easy to install. Its built-in magnets make it effortless to mount the XMicro2 on a vehicle's roof, and the antenna is supplied with 23 feet of thin, flexible cable that can be easily routed and hidden from view. Rubberized feet on the bottom make it possible to install the XMicro2 without drilling into the vehicle's surface. In common with every TERK antenna, the XMicro2 comes with everything needed to complete an XM Satellite Radio antenna installation. The XMicro2 is fully compatibl
Customer Reviews:
Worth the extra cost.......2007-12-23
There are other xm after-market antennas on the market, and most of them are much less expensive. I have changed out 2 of those in the past, and continuosly had problems in high traffic areas and under bridges getting pops, hissing and even interruptions in service. When I saw this one at best buy (I paid $40) I thought it was a bit excessive, but after seeing the one in the mobile audio installers car I was sold. I installed this one and sure enough, crystal clear sound! Really allowed me to enjoy my XM in an entirely new way, In fact I felt robbed that I did not have this before. Now even in crowded areas and going under a bridge I have full bars, in a tunnel today I lost connection, but the second I saw light, I had it back. You can even feel the better quality of this chord, being a thicker rubber that really feels substantial. Anyone who is really serious about the XM unit or who is an audiophile, it's worth a pick-up.
Product Description
The MWFS is a modular system with 3 wall panels and 2 glass shelves.PRODUCT FEATURES:Modular design for custom applications;Use with flat panel or standalone;Large cable management openings allow power and A/V cords to be separated, but concealed.
Customer Reviews:
Everyone loves it.......2007-12-21
A bit pricey but it was well worth it. Installation was easy especially if you already have your TV mounted in the wall studs. Just follow the same studs. This is mounted below a 40" Sony and looks great. The color is a dark wood brown. Not exactly black but you can hardly notice unless you have a spotlight in the area. Anything smaller and the mount may look too big (my opinion). Anyway, it looks great! As far as the WAF (wife acceptance factor) it rates very high! Four stars because of price. If it was a in the $150 price range it would earn 5.
Omnimount MWFS - Great product.......2007-12-14
OmniMount MWFS Adjustable 2 Shelf Wall System w/ Cable Management
I spent days reviewing other products before settling on this one even though this was the most expensive. The product arrived the day after I ordered even with the free shipping. Packaging was great and the assembly was fairly intutive. There are no written instructions just pictures. That is my only gripe. The construction of the frame is solid.
There is plenty of room to hide the cables. The overall finish is very good.
I intend to post a picture after I have all the components fully setup on the shelf.
Great LCD wall furniture!.......2007-12-02
I purchased the Moda series wall furniture from Amazon along with an Omnimount tilting wall mount for my Samsung 40 in. LCD. I found that the Moda wall furniture was fairly easy to install, but it is essential that you measure very carefully in order for the top wiring cover to be flush with the bottom of the TV so that the wires don't show. Other than that it was pretty simple to mount the frames, install the shelves, hook up the components and hide the wires behind the wiring covers. It looks like a very professional job and it only took about two or three hours to do everything. There is one issue that is rather annoying. The whole idea of buying the Moda system was so that I could hide the wiring without cutting a lot of holes in the wall. It certainly hides the wiring except where the power cords exit the bottom of the bottom wiring cover. So, I still have some unsightly wires and my surge protector extending below the bottom of the wall furniture. I fixed that by placing a leather bench under the wall furniture, which gives it a nice look but still doesn't completely solve the wiring situation. Other than that, I'm quite happy with the entire set up. I recommend it.
Happy with it........2007-06-20
It is sturdy, and I like the way the cables can be hidden behind the panel.
The TV ends up high on the wall, and the mounting instructions were confusing which is why I give it only 4 stars.
See the customer image I uploaded for the end result. Shipping was very fast which I must give a lot of credit to Amazon for.
great shelf.......2007-05-13
This shelf is great and as sturdy as can be. I had to readjust the wires several times and it is a breeze.
Product Description
The Hardwood series speaker stands are made of the first-grade kiln dried hardwood with beautiful hand-sanded six-step furniture grade finish. The stands are all equipped with custom spikes for base to add stability to the entire system. Each stand has a rear pillar wire path for neat installation, isolation pads for base and top plate.
Cheap Consumer Electronics:
- Belkin F1DF102U Flip 2-Port KVM Switch (USB Connection)
- Belkin F5D6020 Wireless Notebook Network Card
- Belkin F5D6230-3 Wireless Cable/DSL Router
- Belkin F5D6231-4 Wireless Cable/DSL Router
- Belkin F8T031 Bluetooth Wireless USB Printer Adapter
- Bose TriPort headphones, for personal and portable listening - Blue
- Bridging Mc 10/100btx RJ45 To 100bfx 1300nm Mm Sc 2km
- Buffalo Technology WLICBG54S 125 High Speed Mode Wireless Notebook Adapter With AOSS
- Catalyst 3560E 48-GIG 2-10GE
- Catalyst Express 500-12TC
Cheap Consumer Electronics List
Cheap Consumer Electronics