Sony DPR 120 - 50 x DVD+R - 4.7 GB 8x

Product Description

Sony DVD+R disks offer two-way compatibility for data and video applications: the disks are compatible with both DVD player and PC DVD drives. Users with a DVD-ROM drive and MPEG2 decoding capability within their PC can play back DVD+R disks recorded by a DVD+R/+RW recorder. Also, the disks are compatible with the existing DVD-Video/ROM format. They use the same 8-16 modulation and RS code as DVD-ROM with a bare disk, so no cartridges are required. The disks use the same recording density as DVD-ROM single layer disks.

Product Description

Further Information Please note: Maximum supported distances and resolutions are dependent on both the monitor and the chipset used in the graphics card. The following example shows the maximum values from a test with a Belinea 1280 x 1024 DVI flat panel display and two different graphics cards (ATI Radeon 7000 and NVidea 5200). LINDY SLD cable length (graphics card to monitor) Max. resolution 20m 1280 x 1024 @ 60Hz 25m 1024 x 768 @ 60Hz Please click here for our DVI Guide. Features of the RF-BLOK shielded design: Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield Increased insulation resistance up to 25% No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux Tight fit of internal wires as there is no inner mould No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible Smaller overall dimensions which allows more room behind the host or peripheral Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one Why not try our LCD & Monitor Cleaning Kit? Stylish screen cleaner! This smart little cleaning kit has been specially designed for use with modern TFTs, Plasma displays, monitors and TVs. Made from stylish brushed aluminium, the kit features an integrated micro-fibre sponge and pump-action cleaning gel. Just spray-on and wipe off to remove those annoying smudges and finger marks. UK customers, click here for details Eire customers, click here Please note: The LCD & Monitor Cleaning Kit is not available in the USA

Average customer rating:

DVI-D SLD Extension Cable, 15m

Manufacturer: LINDY
ProductGroup: CE

DVI-D SLD Extension Cable, 15m

ASIN: B000JSR25O

Product Description

Further Information For a direct connection between the graphics card and DVI monitor and also when using the LINDY DVI Extender, we have found the following optimum resolution vs. distance (when high quality DVI chipsets are used with the devices): 1280 x 1024 @ 60Hz -20m 1024 x 768 @ 60Hz - 25m However, this is dependent on the DVI hardware used in the graphics card and monitor. For certain other devices, with different DVI chipsets, (i.e. LINDY DVI splitter and LINDY DVI KVM switch and other DVI Extenders) the maximum distances may be reduced to 1024 x 768 - 15m. Please click here for our DVI Guide. Features of the RF-BLOK shielded design: Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield Increased insulation resistance up to 25% No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux Tight fit of internal wires as there is no inner mould No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible Smaller overall dimensions which allows more room behind the host or peripheral Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

Product Description

CLASS 3 QUALITY SPEAKER CABLE, 14 GAUGE, 4 CONDUCTOR QUALITY CABLE FOR DISTRIBUTED AUDIO This 14 AWG 4 conductor wire is perfect for wiring up your audio distribution system. Use it between a speaker switcher and volume controllers. IT ALL STARTS WITH THE WIRE! If you want to enjoy the wonders that technology can bring to your home today and in the future, let me tell you... IT ALL STARTS WITH THE WIRE. A small expenditure today, while your home is being built, will insure that you can have multimedia excitement delivered to every room in your home. Avoid more costly and messy retrofitting on later on, put Multi Mode Bundled Cable inside your walls while you are building. Even if you don't use all of the capability of this cable you can leave it unfinished inside the walls until such time as you upgrade your home's technology level later on. Can you imagine tearing open the walls to do this? It will add value to your home. Multi-mode cabling gives you the flexibility to meet the demands of the future. Check out these additional products: Automating Your Home The Home Controls Lifestyle

Product Description

Hard disk drive DASD card

Average customer rating:

IBM 03K9037 FRU Hard disk drive DASD card

Manufacturer: IBM
ProductGroup: CE

IBM | Brands | Electronics Features | Electronics

Product Description

IBM 03K9037 FRU Hard disk drive DASD card

Cheap Consumer Electronics:

Cheap Consumer Electronics List

Cheap Consumer Electronics