Product Description
Save time and money with our 10//100 Ethernet connection splitters. With our handy splitters, you won't need to pull cable for another connection... simply plug one of these "Y" splitters into your existing LAN jack, connect a second compact "Y" splitter to your patch panel where the LAN jack terminates, and you've got another connection! These splitters utilize the 2 unused pairs in Ethernet cables to combine two data signals on a single cable.
Customer Reviews:
They do what they were intended to do.......2007-06-28
They work as intended, they split the wiring and use the unused pairs to allow two devices to use one data jack. You need a pair of them and put one on the other end to take the split pair and connect to two ports on a switch or hub. It is not a 2 port ethernet switch and will not magically connect two devices to one data jack without any changes in your data closet (or other end). It saves you from pulling new wiring in the walls is all. What do you want for
< $10?
Works exactly as advertised.......2007-01-04
First off, I think some people are confused about the usage of this product, which may explain some of the negative reviews. This product does not magically turn one Ethernet port into two, this isn't possible without a hub or switch. What this product does do is allow you to run two Ethernet ports over a single Cat5/Cat6 wire by utilizing the normally unused pairs for the second link. In order to do this, though, you either need two of these units or you need to do some custom wiring elsewhere.
I've used several of these in wiring my house where I didn't want to have to add a second run of Cat6. I've used them for both running two Ethernet links over a single run as well as for running both telephone and Ethernet over the same Cat6 run. They work just as I expected without any discernible loss in signal etc.
As another reviewer said, this item is a great way to get more mileage of existing wiring while providing a clean install that doesn't require a bunch of special wiring. All-in-all a simple, yet excellent, product.
life-saver in retro installs.......2006-08-29
I just used ten of these to get extra mileage out of existing wiring in a small office. Beats spending the time to make them yourself.
not exactly a splitter.......2006-03-15
this item did not meet my expectations for its intended use. the intent of application was: to operate 2 ethernet devices from 1 active line. one side is active, the other, dead. do not get this item for this purpose, get an eternet hub or believe it or not, a wireless router will work.
Product Description
The LCD Wall Mount with Swivel/Tilt and Extension Arm features: Versatile Viewing 2 pivot points plus swivel point Swivels left and right up to 180 degrees Upwards and downwards up to 70 degrees Maximum extension: 2 3/4"; Minimum extension: 2 1/4" Quality Construction Safely hold up to 33 lbs. Light weight aluminum construction with electrostatic powder coat finish Easy Installation Installation hardware included Designed for style, strength, and ease of installation The wall plate allows the brackets to be securely mounted to either stud or solid walls, allowing location flexibility Assembly level/degree of difficulty: Easy
Product Description
The LCD Wall Mount with Swivel and Tilt with 2 Articulating Arms features: Versatile Viewing 2 pivot points plus swivel point Swivels left and right up to 180 degrees Upwards and downwards up to 70 degrees Maximum extension: 14-3/4"; Minimum extension: 2-1/4" Quality Construction Safely hold up to 33 lbs. Lightweight aluminum construction with electrostatic powder coat finish Easy Installation Installation hardware included Designed for style, strength, and ease of installation. The wall plate allows the brackets to be securely mounted to either stud or solid walls, allowing location flexibility. Assembly level/degree of difficulty: Easy
Product Description
VESA 100mm compatibleWeight capacity: 40 lbs.Tilt, pan, and swivelUniversal mount on wall or under counterRotational adjustment at wallSilver
Product Description
The LCD Wall Mount with Swivel and Tilt features:Versatile Viewing 2 pivot points plus swivel point Swivels left and right up to 180 degrees Upwards and downwards up to 70 degrees Maximum extension: 2 3/4"; Minimum extension: 2 1/4" Quality Construction Safely holds up to 33 lbs. Light weight aluminum constructionElectrostatic powder coat finish Installation hardware included Easy Installation The designed for style, strength, and ease of installation. The wall plate allows the brackets to be securely mounted to either stud or solid walls, allowing location flexibility Light weight aluminum construction Assembly level/degree of difficulty: Easy
Product Description
HANDLE FOR 3063 HEAD
Cheap Consumer Electronics:
- NEW VGA to TV CONVERTER S-VIDEO+RCA OUT CABLE ADAPTER
- Nintendo Wii Component Cable AV Cable for HDTV/EDTV High Definition 480p
- Nintendo Wii High Resolution AV / HDTV / EDTV Component Cable
- Panasonic CA-DC300U iPod Connection Cable
- PHOENIX GOLD M-1250 Super Oxygen Free Copper 12-Gauge Speaker Cable
- PHOENIX GOLD VMT-100 WHITE 100/50 Watt Impedance-Matching Stereo Volume Control in White
- Plantronics .Audio 910 Bluetooth Headset
- Proco SEG-10 Guitar / Instrument Cable 10 ft.
- Razr2 V8 V9 V9m Phone Tools 4 (Software CD + Micro USB Data Cable) SVN5539S SKN6238A
- RCA CRF910 Auto Switching RF Modulator with Gold - Plated Connectors, Coaxial and S-Video Input
Cheap Consumer Electronics List
Cheap Consumer Electronics
Plugs & Adapters
|
Cables & Interconnects
|
Audio & Video Accessories
|
Accessories & Supplies
|
Categories
|
Electronics
RJ45 Coupler F-F Straight
Cat5e Ethernet Flat Cable, Wboot 10ft, Black
Network Pair Splitter, 10base-T, Cat5, Single
Belkin 3FT CABLE CAT5 UTP RJ45-M/M MOLDED GRY ( A3L791-03CM )
Belkin Fast CAT 5e 3 foot Gray Patch Cable, Snagless Molded, RJ-45 Connectors
